|
- Pit and quarry dewatering is made easier with Turbi-Float®. With flows through 3500 gallons per minute and heads to 300 feet, Turbi-Float® can handle many projects with a single pump, and where required multiple pumps can be connected in parallel for higher capacities.
- The Turbi-Float System better provides washing and processing water. No more priming of suction lift centrifugals, and draining in freezing weather. Standard air-cooled motor drivers offer increased durability and efficiency at a lower cost than submersible motor pumping equipment.
- Flood irrigation of cropland with Turbi-Float® is efficiently accomplished with the high volume, low head models.
- Center pivot, side roll, and other overhead application methods are easily handled by the high performance Turbi-Float System®.
- Confined Animal Feeding Operations (CAFO) which dispose of effluentwastewater benefit from the durability and ease of operation of the Turbi-Float System®. “Yellow water” disposal is efficiently pumped by Turbi-Float®. (Not intended for solids handling applications)
- CAFO freshwater supplies from surface water resources, such as canal transport systems to your facility.
- Supply of surface water for dust control, washing, processing, and other uses.
- Non-potable irrigation water for parks and recreation.
- Golf course irrigation from ponds and lakes. Significant cost savings over hard-set equipment in expensive pumping stations.
|
|
|
