Canfield Custom Pumps

Group Six

Model	HP	RPM			Head / Capacity
10EBL-1-7.5	7.5**	1750	Total Head (ft.)	-	26	28	32	34
			Gallons Per Minute		1000	900	800	700
10EBM-1-10	10**	1750	Total Head (ft.)	-	26	30	32	35
			Gallons Per Minute		1200	1100	1000	900
10QKH-1-10	10**	1750	Total Head (ft.)	-	16	20	24	28
			Gallons Per Minute		1800	1600	1400	1300
10QKH-1-15	15	1750	Total Head (ft.)	-	27	32	35	36
			Gallons Per Minute		1800	1600	1400	1300
12EHM-1-20	20	1750	Total Head (ft.)	-	42	48	50	54
			Gallons Per Minute		1500	1400	1300	1200
12ENL-1-25	25	1750	Total Head (ft.)	-	40	46	52	58
			Gallons Per Minute		1900	1750	1500	1300
12EBM-1-30	30	1750	Total Head (ft.)	-	38	46	50	52
			Gallons Per Minute		2400	2200	2000	1800
14ENL-1-40	40	1750	Total Head (ft.)	-	50	55	60	65	70
			Gallons Per Minute		2600	2400	2200	2000	1800
14ENL-1-50	50	1750	Total Head (ft.)	-	60	65	70	75	77
			Gallons Per Minute		2800	2600	2400	2200	2000
14ENH-1-60	60	1750	Total Head (ft.)	-	60	65	70	75	78
			Gallons Per Minute		3250	3000	2750	2500	2250

*Flow rates: 700 - 3250 G.P.M. Discharge pressure: 16 - 78 feet. See individual model curves for specific performance.

** All Turbi-Float Pump Systems are priced using three phase 230/460 volts electric motors. Single phase electric motors are available from 5hp through 10hp and may be substituted at the addtiional cost of:

$340 for a single phase 230 volt 5hp motor
$349 for a single phase 230 volt 7.5 hp motor
$421 for a single phase 230 volt 10 hp motor

Prices subject to change without notice

FOB Ft. Morgan, CO

Price Sect. Doc. #09-2007

The above charts show performance using nominal service factor of the motor in some applications

< Back